BRAND | Gefa |
Product | AT 200F - DN 500 (SD2263GA6500Y) |
Description | Pneumatically. pushers |
Internal code | IMP4274943 |
Technical specification | AT 200F - DN 500 domino solids sliders PN10 - PS1TS -10°C/+120°C Plate slider, flange version can be used as an intermediate flange and end valve. Solids, compact cross-seals. Conical panel milling before the Cross seals, interrupted in the middle. Side panel guide alternately interrupted in the front and rear housing. Dense termination in both flow directions. Flange: PN 10, Overall length: DIN EN 558 Series 20, Housing: DIN EN 1092-1 EN-GJL-250 (GG 25), narrowed in the passage Flow direction marked on both sides Colour: RAL 9005, electrically conductive Plate: 1.4301, segment radius (45 degrees beveled) milled wipeed edges 1. Cross Seal: PTFE/Silicone, 2nd Cross Seal: NBR Round cord: ceramic fibre, screws: galvanised steel. max. operating pressure: 1 bar Cylinder pneumatic BPSD2S3500A double-acting, without cushioning Diameter: 300 mm, control pressure: 6 bar Housing: Alu, Piston Rod: 1.4104 Structure: Columns, steel coated |
Please Contact Us to Order to offer competitive prices and delivery time for Gefa - AT 200F - DN 500 (SD2263GA6500Y) Pneumatically. pushers number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Germany Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
AP2 AP 2SR PNEUM. ANTRIEB F05 SW14
single-acting embodiment -. spring returned - Control pressure: max 10 bar, prev .. Control pressure: 6 bar Number of springs: Housing: hard-coat protected aluminum Piston: Aluminum Stroke: on Ambient temperature: -20 ° C to + 80 ° C
Seal for driving AP8
GEFA ball valve, three-piece
Giving vent K19E DN 300 EPDM
throttle valve
(body)
(body)
for series HG
for series HG
Seat ring EPDM for series K17 / K19 / KG / KE
Seat ring EPDM for series K17 / K19 / KG / KE
Seat ring MVQ for series K11 / K17 / K19 / KG / KE
pneumatic drive
MC 175FA (S175D) PNEUM. ANTRIEB F14
double-acting embodiment, control pressure: max. 10 bar prev control pressure. 6 bar, housing: Aluminum hard-coat protected piston: Aluminum Stroke: adjustable on / to +/- 10 degrees
MC 175FB (S175SR) PNEUM. ANTRIEB F14
single-acting fin. spring-closing Control pressure: max 10 bar, prev .. Control pressure: 6 bar Spring group 10 Housing: Aluminum hard-coat protected piston: Aluminum Stroke limiter adjustable on / to +/- 10 degrees
repair kit
Actuator Repair Kit
Pneum.Antrieb F10
Gasket kit
MC 175A Pneumatic
wafer type for flanges acc. DIN EN 1092-1 PN 6-40, face-to-face dimension acc. DIN EN 558-1 series 49 (K4) body: 1.4408, valve plate: 1.4571 spring: 1.4571 sealing: metal
(GEFA- check valve for flanges DIN EN 1092-1 PN 6-40, Seal: FPM Housing: 1.4408, valve plate: 1.4571, spring 1.4571 Overall length: 49 number (K4))