| BRAND | Hioki |
| Product | P9000-01 |
| Description | DIFFERENTIAL PROBE |
| Internal code | IMP796489 |
| Weight | 1 |
| Technical specification | Measurement functions Waveform monitor output only Frequency characteristics: DC to 100 kHz, -3 dB Waveform monitor output/AC RMS value output (switchable) Wave mode frequency characteristics: DC to 100 kHz, -3 dB RMS mode frequency characteristics: 30 Hz to 10 kHz; response time: 300 ms (rising) or 500 ms (falling) Division ratio 1000:1 or 100:1 (user selectable) DC amplitude accuracy ±0.5% f.s. (f.s. = 1.0 V; voltage division ratio: 1000:1) (f.s. = 3.5 V; voltage division ratio: 100:1) RMS amplitude accuracy n/a ±1% f.s. (30 Hz to 1 kHz non-inclusive, sine wave), ±3% f.s. (1 kHz to 10 kHz, sine wave) Input resistance, capacity Between H and L: 10.5 MΩ, 5 pF or less (at 100 kHz) Max. allowable input 1000 V AC/DC Max. rated voltage to earth 1000 V AC/DC (CAT III) Operating temperature -40˚C (-40˚F) to 80˚C (176˚F) Power supply (1) AC Adapter Z1008 (100 to 240 V AC, 50/60 Hz), 6 VA (including AC adapter) or 0.9 VA (probe only) (2) USB bus power (5 V DC, USB Micro-B receptacle), 0.8 VA To prevent an electric shock, when supplying power from the USB-microB terminal, please supply from a device which USB's GND terminal of the source device is grounded. (3) External power supply (2.7 V to 15 V DC) Dimensions and mass 128 mm (5.04 in)W × 36 mm (1.42 in)H × 22 mm (0.87 in)D, 170 g (6.0 oz), Cord length: Input: 70 cm (2.30 ft) ; output: 1.5 m (4.92 ft) |
Please Contact Us to Order to offer competitive prices and delivery time for Hioki - P9000-01 DIFFERENTIAL PROBE number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Germany Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
AC clamp meter RMS (420110004); incl. storage bag 9398, Priifleitung 9208 (L) and 3V lithium coin battery CR2032; O 33mm; about B57xH175xT16mm, 1009; without calibration,
Digital AC clamp meter (30/300/1000 A) TRMS; incl. Aufbeahrungstasche 9399, 9207-10 test line (L); 9V battery 6F22 or 6lr61; * Manual in German and English without calibration certificate.
AC/DC Clamp On HiTester
3285-20 (obsolete - replced by CM4373)
AC/DC Clamp Meter
Hioki 3286-20 Active / Reactive Power Frequency Phaseand Harmonic Clamp Meter
Power Analyzer
POWER ANALYZER
High Voltage Insulation Tester
3554 obsolete/alternative BT3554
Battery HiTester
LAN Cable HiTester
RS232 Interface Plate Plug-in for 3522_SOT 3S12-SO Attention! There is only 1 slot available. simultaneous operation with 95tB_01 (cPlB) iGicIT mdotich (documentation is available in English only)
PC Card 1GB
PC Card 2GB
Hioki AC/DC Current Sensor
Hioki 3532-50 Benchtop LCR Meter speed up to 5msec and 42Hz to 5MHz frequency range
Hioki 9234 Recording Paper For MR8880-20 8807 / 8808 / 8420s etc. (10rolls)
Hioki 9320-01 Logic Probe For 8807 / 8808 / 8847 / 8855 / 8860s / 8870
adapter
Hioki 9447 Battery Pack For 8807 / 8808s / 8420s
Hioki MR8880-20 Memory Hicorder
Hioki MR9000 Printer Unit For MR8880-20
Voltage Detector (multiple of 12)
