| BRAND | Epro (Emerson now) |
| Product | MMS6312 |
| Description | Dual Channel Rotational Speed & Key Phasor Monitor |
| Internal code | IMP347824 |
| Weight | 1 |
| Technical specification | (for use in the IMR 6000/10 chassis) Or equivalent Technical data: Power supply: Supply voltage: 18....24....31.2 V DC according to IEC 654-2, class DC4 Power consumption: max. 6 W (max. 250 mA at 24 V) Sensor Inputs: Number of inputs: Two, independent, Type of inputs: Eddy current differential, Input resistance: >100 kΩ, Input voltage range: 0 to ±27.3 VDC, Input frequency range: 0 to 20,000 Hz, 65,535 RPM Measuring Range: Range: Continuously adjustable with the configuration software, Smallest range: 2 V, Largest range: 0-30 V, Sensor power supply: Separate buffered sensor supply Galvanically separated from all system voltages and system supply voltage Open and short circuit proof, Nominal voltage: -26.75 VDC, Available current: Nominal 20 mA, maximum 35 mA. Analysis: Measurement modes: Hot configurable, Speed measurements with each channel: Forward and reverse rotation with trigger wheel (1 to 255 trigger marks), max. freq. 20 kHz, Pulse width time window: 5 to 10 msec, Key pulse detection with each channel: One key mark on the shaft Possible with multiple key marks, but phase will change with each start-up, Zero speed monitor with each channel: Detects zero speed of trigger wheel with 1 to 255 trigger marks Measures time between two pulses in a configurable range of 1 to 1700 seconds, forward or reverse direction, Both channels in combined use: Detects direction of rotation of two trigger marks of which one is phase shifted Detects a difference between the speed of two trigger wheels, difference adjustable in number of RPM.Rear Outputs Available: Current mode outputs: 0/4-20 mA output for each channel proportional to main value Open/short circuit proof, Permissible load: <500 Ω, Accuracy: ±1% of full scale, Settling time: configurable, 0 to 10 seconds, Pulse Outputs: 0 Hz-20 kHz output for each channel Open/short circuit proof, Permissible load: >10 kΩ, TTL Pulse Output: 0 Hz-20 kHz output signal for each channel, 0-20 kHz Open/short circuit proof, Permissible load: >10 kΩ. (for use in the IMR 6000/10 chassis) |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Epro (Emerson now) - MMS6312 Dual Channel Rotational Speed & Key Phasor Monitor number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Germany Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Back plane
Displacement Transducer
Speed and Keypulse Transmitter
Eddy current signal converters
OUTPUT RELAY CARD
SHAFT
Eddy Current Sensor 8mm
ECCENTRICITY SENSOR
Vibration transducer
Vibration transducer
hall effect probe